General International 40-350, Руководство пользователя

Страница: 14 / 23

SECURING A TEMPLATE TO THE WORK PIECE
Various methods are used to secure template to the
work piece. The operator should select the best
method to secure the template to the work piece
based on
piece is large enough to surpass the
front of table, while still leaving space for the desired
cut. (Fig, 35)
The work piece may be placed against the template
using dowels as
work piece
through the cut. (Fig. 36)
HORIZONTAL TOGGLE CLAMP
Horizontal toggle clamp are useful when the regular
"C" clamps cannot allow the freedom of movement
required in shaping (Fig. 37). No additional hand
pressure is necessary for the operator to control the
work piece. Anchor points like dowels are necessary
with this setup.
PROTECTION workplace
The operators should take precautions to protect
themselves, and all others around the work area and
the machine itself for improper use.
Never leave machine unattended while it is running,
the operator needs to be very focused and attentive,
and not looking elsewhere or carrying on
conversation while using the machine. Carelessness
or inattention will result in serious injuries and
damages.
SPECIAL CUTS
the cutters. The most efficient
cutters are carbide tipped to ensure cleaner cuts and
longer cutter life. Small cutters may be solid carbide,
some use inserts. Since there is such various choices,
the operator is limited only
cutter