General International 10-950, Руководство по установке и эксплуатации

Страница: 13 / 18

13
CLEANING THE DUST TRAYS
TIP: RESIDUE IN THE DRAWERS MAY BE HAZARDOUS TO HEALTH. IT IS RECOMMENDED TO WEAR GLOVES AND RESPIRATORY
PROTECTION BEFORE HANDLING AND CLEANING THE DUST DRAWERS OF YOUR MACHINE.
1. To open the access door C pull the two levers A and
turn it clockwise as shown B .
2. To empty the dust tray remove it as shown. Make
sure to re-install it before closing the door.
A
B
C
3. To open the front access door pull up the lever A ,
and turn it clockwise as shown, B .
4. To empty the dust tray remove it as shown. Make
sure to re-install it before closing the door.
A B
OTHER ROUTINE CHECKS
• Periodically inspect all hardware, fittings and fasteners that may have loosened due to vibration - retighten as
needed.
• To minimize airborne dust particles periodically inspect all dust collection fittings. Retighten as needed.
• Periodically inspect inside of all pipes, fittings, hoses, blast gates, and connectors for accumulated dust build-
up or other obstructions, and clean as needed. Vacuum or manually remove debris as needed.
• Do not operate with a damaged filters - replace a damaged filter immediately.
• Periodically inspect the power cord and plug for damage. If necessary replace the power cord and plug at
the first signs of visible damage.
• Use only recommended parts and accessories. The use of parts or accessories NOT recommended by
GENERAL® INTERNATIONAL may result in a risk of injury or damage to the machine.