background image

5

RULES FOR SAFE OPERATION

1.

  Do not operate the dust collector when tired, dis-

tracted, or under the effects of drugs, alcohol or 
any medication that impairs reflexes or alertness.

2.

  The working area should be well lit, clean and free 

of debris.

3.

  Keep children and visitors at a safe distance when 

the dust collector is in operation; do not permit 
them to operate the dust collector.

4.

  Childproof and tamper proof your shop and all 

machinery with locks, master electrical switches 
and switch keys, to prevent unauthorized or unsu-
perviseduse.

5.

  Stay alert! Give your work your undivided attention. 

Even a momentary distraction can lead to serious 
injury.

6.

  Fine particulate dust is a carcinogen that can be 

hazardous to health. Work in a well-ventilated area 
and wear face, eye, ear, respiratory and body pro-
tection devices.

7.

  Do not wear loose clothing, gloves, bracelets, neck-

laces or other jewelry while the dust collector is in 
operation. Wear protective hair covering to contain 
long hair and wear non-slip footwear.

8.

  Do not insert hands, fingers or any foreign objects 

into ventilation inlet and outlet openings. Do not cut 
or break the intake screen in the inlet.

9.

  Do not operate this machine without all filters prop-

erly installed on the unit.

10.

 Clean filters on a regular basis and replace as 

needed.

11.

  Do not handle the electrical plug with wet hands. 

12.

 Do not use this unit outdoors, on or near wet sur-

faces. 

13.

  Always turn on the dust collector before starting the 

dust producing machine. Always turn off the dust 
producing machine before turning off the dust col-
lector.

14.

 Do not vacuum glass, water or anything that is 

burning, smoking or smoldering such as cigarettes, 
matches or hot ashes. 

15.

  Do not vacuum or use this dust collector near flam-

mable or combustible liquids, gases, gasoline 
or other fuels, lighter fluid, cleaners, oil or solvent 
based paints, natural gas, hydrogen or explosive 
dusts like coal dust, magnesium dust, grain dust or 
gun powder.

16.

  Do not operate the unit until a dust hose is installed 

onto the hose inlet and make sure all the joints and  
connectors are properly installed.

17.

  Never leave the machine unattended while it is run-

ning or with the power on.

18.

 To avoid health hazards from vapors or dusts, do 

not vacuum toxic material.

19.

  Use only recommended accessories. Use of acces-

sories NOT recommended by GENERAL® INTERNA-
TIONAL may result in a risk of injury or damage to 
the machine.

20.

 Always disconnect the unit from the power source 

before servicing, performing any maintenance or 
repairs and when changing bags or hoses, or if the 
machine will be left unattended.

21.

  Make sure that the switch is in the“OFF”position be-

fore plugging in the power cord.

22.

  Make sure the tool is properly grounded. If equipped 

with a 3-prong plug, it should be used with a three-
pole receptacle. Never remove the third prong. 

23.

 Never stand or lean on machinery. Serious injury 

could result if the tool is tipped over.  

24.

  Do not use this dust collector for any purpose other 

than its intended use. If used for other purposes, 
GENERAL

® 

INTERNATIONAL

 disclaims any real or im-

plied warranty and holds itself harmless for any in-
jury, which may result from that use.

To help ensure safe operation, please take a moment to learn the machine’s applications and limitations, 
as well as potential hazards. General

®

 International disclaims any real or implied warranty and holds itself 

harmless for any injury that may result from the improper use of it’s equipment.

IMPORTANT NOTICE

The sound level of this machine is rated at approximately 

85 dB 

during operation. Make sure that adequate hear-

ing protection is used and that the overall sound level within the working environment is taken into consideration.

Содержание 10-950



















Отзывы: