Additional Safety Instructions
Specific to this Dust Collector
Because each shop situation is unique, no list of safety guidelines can ever be
complete. The most important safety feature in any shop is the knowledge and good
judgement of the user. Use common sense and always keep safety considerations, as they apply
to your individual shop situation first and foremost in mind. If you have any doubts about the
safety of an operation you are about to perform: STOP! Do not perform the operation until
you have validated from qualified individuals if the operation is safe to perform and
what is the safest method to perform it.
7.
Before connecting the machine to the power
source, verify that the voltage of your power sup-
ply corresponds with the voltage specified on the
motor I.D. nameplate. A power source with greater
voltage than needed can result in serious injury to
the user as well as damage to the machine. If in
doubt, contact a qualified electrician before con-
necting to the power source.
8.
The high speed blower fan inside the blower housing
can amputate fingers, grab loose clothes or neckties.
DO NOT insert fingers or any foreign object into the
blower housing.
9.
The sound level of this machine is rated at approxi-
mately 80 db during operation. Make sure that ade-
quate hearing protection is used and that the overall
sound level within the work environment is taken
into consideration.
1.
Make sure that the operator has been properly
trained and has read, and understands the own-
ers manual before operating any machinery.
2.
This dust collector is intended for indoor use for dry
dust collection only. To limit the risk of electrical
shock, do not use this unit outdoors or on or near
wet surfaces, and do not use this unit to collect or
vacuum liquids, nor wet or damp materials.
3.
Always unplug the machine from the power
source before servicing, unclogging or cleaning
the unit.
4.
Fine particulate dust is a carcinogen that can be
hazardous to health. Work in a well-ventilated area
and wear face, eye, ear, respiratory and body pro-
tection devices.
5.
Do not operate this dust collector with a damag-
ed or malfunctioning switch; replace a damaged
or malfunctioning switch immediately.
6.
Protect the power cord from damage. Be mindful
of the location of the power cord particularly when
moving the dust collector. Avoid crushing, rolling
over, stepping on, cutting or in any way kinking or
damaging the cord or it’s plug. Avoid power cord
contact with oil, grease, hot surfaces or corrosive
chemicals or substances. Do not operate this dust
collector with a damaged power cord or plug.
Replace a damaged power cord or plug at the
first signs of damage.
6
Содержание 10-800CF M1
Страница 24: ...WIRING DIAGRAM 24...
Страница 25: ...25 Notes...