General Hobby Wilga 100cc, Инструкция по сборке

Страница: 15 / 20

3 Tighten the Velcro ties secure the fuel tank.
Aero-Tow
1 Install the aero-tow and servo onto the plywood 1 with screws.
2 Find the right position on the fuselage then cut a hole for the aero-tow.
Install the plywood 1 as shown in the photos. Stick it into the fuselage very
well.
3 Stick the plywood 2 and 3 next to the plywood 1. Make the hole same
position as in the fuselage.
4 Insert the stick (pushrod) into the aero-tow and connect the other side
onto the servo arm.
5 Install the rings and wires as shown.
Plywoold 1 plywood 2 and 3