General Hobby Wilga 100cc, Инструкция по сборке

Страница: 13 / 20

Engine Installation
Pre-marked holes for the engine
1 there marks also how much you need to add to make the right thrust and
down thrust.
2 Insert the bolts through flat fender washers, the firewall and into the
engine stand offs. Tighten firmly. Secure mounting bolts nuts with Blue
Loctite.
3 Use a bit to drill a pushrod exit hole on the firewall in line with the engine
carburetor throttle arm.
4 Attach the ball link to the throttle pushrod and secure to the carburetor
throttle arm with a bolt and nylon lock nut.
5 Insert the throttle servo into the servo mounting tray with an output arm