General Hobby Wilga 100cc, Инструкция по сборке

Страница: 7 / 20

Use 3mm taps to lock the landing gear cover
Drill another two holes on the fuselage for the gear braces.
The gear braces is for scale look. So you just need to insert the gear
braces into the fuselage
LED light
Find out the LED light system.
Insert the LED light into the holder as shown.
Find out the holes for the LED light in the wings and rudder.
The voltage for the light is 6V.
Find out the hole for the LED light on the top of the rudder and cut it out.
Insert the LED light wire from the top of rudder, and glue it onto the rudder.