General Dynamics 500-0646, Руководство по эксплуатации

Страница: 38 / 57

500-0646A 29
Step 2. Attach one end of a feed support bar to the standard mount channel using the
existing hole as shown in Figure 22.
Step 3. Match-drill a hole in the feed boom arm and attach the other end of the feed support
bar to the feed boom arm using one (1) ¼ x 7/8” hardware as shown in Figure 22.
Repeat for other side.
Figure 22. Install Feed Support Kit
Note: If you are using a standard feed, use two (2) ¼ x 7/8” hardware included
in the kit to fasten the feed support bars to the standard mount channel as
shown in Figure 23; or, if you are using a motorized feed, use the existing
hardware to fasten the feed support bars to the standard mount channel
as shown in Figure 24.
Step 1
Step 2