General Dynamics 500-0646, Руководство по эксплуатации

Страница: 12 / 57

500-0646A 3
2.1.4 Tools Recommended for Installation
This 3.8-meter VX antenna is designed for assembly by a crew of three with the
assistance of a lifting device such as a forklift. The following is only a partial list of
recommended hand tools. Refer to VertexRSI document 500-0321 for a complete listing
of recommended tools for installation.
Table 1. Tool List
Tool Name and Size Quantity
Open End/Box End wrench (each size) 2
5/16", 3/8", 7/16", 1/2”, 9/16", 3/4", 1-1/16"
1/2” Drive Ratchet 15” Long 2
1/2” Drive Extension 10” Long 2
1/2” Drive Extension 6” Long 2
1/2” Drive Sockets (each size) 2
5/16", 3/8", 7/16", 1/2”, 9/16", 3/4", 7/8”, 1-1/16", 1-1/8", 1-1/4"
3/8” Drive Ratchet 15” Long 2
3/8” Drive Extension 6” Long 2
3/8” Drive Extension 10” Long 2
3/8” Drive Sockets (each size) 2
7/16", 1/2”, 9/16"
3/8” Drive (Female) to 1/2” Drive (Male) Adapter 1
Allen Wrench Set (1/16” thru 3/8”) 2
Phillips Screw Driver (+) 2
Regular Flat Screw Driver (-) 2
25 Ft. Measuring Tape 1
Claw Hammer 2
2 lb. Hammer 2
Inclinometer 1
Level (Alum. 18”) 1
Step ladder 6 Ft. (2m) and 16 Ft. (5m) 1
12" Pipe Wrench 1
Cordless drill (must have a clutch) 1
Drill Set (1/16” thru 1/2”) 1
Spade Lug Crimper 2
Caulking Gun 1
Nylon Slings – 2” W x 20’ L 4
Utility Belt 2
Bolt Bag 2
Torque Wrench, 0-250 in–lb (0-30 Nm) 1
Torque Wrench, 90-600 ft-lb (122-814 Nm) 1
Torque Wrench, 10-80 ft–lb (14-109 Nm) 1