General Dynamics 500-0646, Руководство по эксплуатации

Страница: 11 / 57

500-0646A 2
2.0 INSTALLATION
2.1 Before Beginning
2.1.1 Antenna Foundation
Prior to the installation of the antenna, the antenna foundation must be complete. Refer
to VertexRSI foundation structure drawing 034372 as well as 039304 for conduit, if an
antenna control system such as 7134/7200 will be used. Recommendations for site
selection are presented in Appendix B.
2.1.2 Shipment Inspection
The VertexRSI 3.8-meter VX antenna is packaged in four basic packages with two
optional packages and one customer-dependent package. Once received, the antenna
shipping packages should be inspected for exterior damage. If damage is found, please
contact SATCOM Technologies for correction. See Appendix C for “Reporting Loss or
Visible Damage.”
Prior to the installation process, it is recommended that the components be inventoried
against the parts list for each antenna. A hardware kit is part of the shipment. A Bill of
Material (BOM) is included inside each hardware kit and may be used to inventory the
hardware. Use the Work Order Bill Of Material "Unit Qty" and "Catalogue Number" to
inventory the hardware. Should any part be missing or if damage is apparent, please
refer to Appendix C, "Reporting Loss or Visible Damage." A complete 3.8-meter VX
antenna shipment contains the following:
Package # Description
1 Hub
2 Radial
Beams
3 Reflector
4
Motorizable Pedestal (open skid)
5 Hardware Kits
6 Jack or Strut Kit
7 Foundation Installation [optional]
8 Feed Installation [customer dependent]
2.1.3 Unpacking Instructions
Care should be exercised when uncrating and unpacking the equipment. Each package
should be inspected as it is opened. The contents of each package should be checked
against the work-order packing list inside each package or against the parts list to verify
correct part numbers and quantities.
If a claim for shipping damages is to be made, save the packing material, the container
and the accompanying paperwork to substantiate the claim with the carrier. Notify
SATCOM Technologies as soon as possible.
Do not return any unit, subassembly or
assembly until authorization and shipping instructions are received from the
factory.