2.4M SERIES 1241 ANTENNA
4096-859
ASSEMBLY MANUAL
REVISION A
Prodelin Corporation
Page 6
8/17/2012
1. INTRODUCTION
1.1.
General Information
This manual describes the assembly and installation of General Dynamics’ 2.4m Rx/Tx
antenna. These instructions cover all areas of assembly and installation. Additional
sections are included in the manual to provide information on antenna pointing and
maintenance. General Dynamics recommends that these instructions be followed
closely, and in the order shown, for proper antenna performance.
1.2.
Unpacking and Inspection
The system containers should be unpacked and inspected at the earliest date to insure that
all material has been received and is in good condition. A packing list for each major
component is supplied.
1.3.
Freight Damage
Any damage to materials while in transit should be immediately directed to the freight
carrier. They will instruct you on matters regarding any freight damage claims.
1.4.
Materials – Missing or Damaged
Any questions regarding missing or damaged materials that are not due to the freight carrier
should be directed to General Dynamics’ Customer Service Department at:
General Dynamics
SATCOM Technologies
1500 Prodelin Drive
Newton NC 28658
USA
(828) 464-4141
