2.4M SERIES 1241 ANTENNA
4096-859
ASSEMBLY MANUAL
REVISION A
Prodelin Corporation
Page 19
8/17/2012
Figure 10: Quad #3 Installation
2
3
STEP 6
(A) Place Quad #3 on the cross arm (item 13) with the seam rib against the seam rib of quad 32
and between the reflector brackets (items 2, 7, 8, 11). Note that the longer side should be aligned
with the major axis.
(B) Insert 5/16” bolts with washers (items 25, 26) thru the brackets and the major seam ribs as
shown. Secure with 5/16” hex nuts and washers (items 26, 27, 28). Hand snug only.
(C) Insert the 1/2” bolt and washers (item 33, 34, 35) thru the cross arm and into the reflector
spacer. Hand snug only at this time.
(D) Remove the temporary 5/16” bolt placed thru the center bracket in STEP 5 after Quad #3 is
supported by the major seam bolts and the 1/2” hardware.
33, 34, 35
13
25, 26
26, 27, 28
Shown with 1240
series positioner for
illustration only
