6. Select
Apply
and
OK
to save and exit.
7. Now you can drag the programs you want to view onto the external monitor.
Opening and Closing the Display
To open the display lid, slide the display lid latch to the right and lift up the lid, then tilt it to a comfortable viewing
position.
To close the display lid, fold it down gently until the display lid latch clicks into place.
CAUTION
To avoid damaging the display, do not slam it when you close it. Also, do not place any object on top
of the computer when the display is closed.
Lid Switch
Your computer has a lid switch that automatically suspends your computer when you close the display and resumes
it when you open the display.
To change the power management settings for the lid switch, perform the following:
1. On the System Tray area of the Taskbar, right-click the
Power Saver
icon (
or
).
2. From the menu, select
Configure Power Settings
.
3. Select the
Advanced
button.
4. Select what you want to happen when you close the display lid:
{
Do nothing
{
Sleep
{
Hibernate
5. Check the
Wakeup box
if you want the computer to resume when you open the display lid.
Cursor Visibility
To improve the visibility of the mouse cursor, you should:
z
Enable the “Pointer Trails” feature to add trailing cursors
z
Use a slow or medium speed/sensitivity level
You can combine a higher level of acceleration with a slow or medium speed/sensitivity level. This allows you to
move the mouse cursor quickly by increasing your finger pressure, while still providing a finer degree of control
when you apply minimum pressure.
NOTE
To change the speed of the mouse, from the
Start Menu
select
Settings, Control Panel
, and then choose
Mouse
to make adjustments.
Memory
Page 20 of 70
VR-2 Help
4/26/2007
file://C:\Documents and Settings\harwoodm\Local Settings\Temp\~hh3F7F.htm
