General Dynamics Itronix | 72-0136-005
GD6000 User Guide
Customizing Your BIOS Settings
Field
Setting Function
Fan
Off
The fan is disabled. Heat management is then controlled solely through throt-
tling.
On
The fan functions normally.
Audio
o
FF
Volume is set to 0 across suspend/resume and boot. Use the existing audio
function keys to restore volume.
On
Audio is preserved across suspend/resume and boot. The default volume level
is set to mid-range.
Back-light
Brightness
o
FF
Brightness is set to 0 across suspend, resume and boot. Fn+F1 restores bright-
ness to the value it was set to before suspend. Additionally, Fn+F7 increases
display brightness gradually. Fn+F6 decreases brightness gradually.
On
Display brightness is preserved across suspend/resume and boot. It is restored
to default when the brightness level is set at 0. The default level is mid-range.
Wireless
Radios
o
FF
All wireless devices are set to off during a suspend/resume or boot. The radio
on/off button can be used to manually turn the radios on or off.
On
The radio on/off button functions normally and radio device power states are
held though suspend/resume and boot.
I/O Device Configuration
This configuration option allows you to assign Serial and Parallel port settings.
Field
Setting
Function
Serial Port A
e
naBled
Disabled
If enabled, user can configure serial port A.
Base I/O address:
3F8
2F8
3E8
2E8
Sets the base I/O address for this serial port.
Interrupt:
IRQ3
irq4
Sets the interrupt request of this serial port.
Serial Port for Touch Screen
e
naBled
Disabled
If enabled, user can configure serial port C.
Interrupt:
irq6
Sets the interrupt request of this serial port.
Serial Port for GPS
e
naBled
Disabled
If enabled, user can configure serial port A.
Interrupt
irq5
IRQ7
Sets the interrupt request of this serial port.