Generac Power Systems PWRcell X11402, Инструкция по установке и эксплуатации

Страница: 49 / 64

System Operation
Installation and Owner’s Manual for Generac PWRCell Inverter 45
Figure 7-6. Selecting System Modes (2 of 2)
6. Enable REbus devices beginning with the inverter.
7. See
Figure 7-7
. From the home page on the
inverter control panel, use the right arrow key to
navigate to the inverter device page.
8. See Figure 7-8 . Press the center button to access
the inverter device main menu.
9. See
Table 7-9
. Select “Enable” and 'Confirm' to
enable the inverter.
Figure 7-7. Enabling Inverter (1 of 3)
Figure 7-8. Enabling Inverter (2 of 3)
Figure 7-9. Enabling Inverter (3 of 3)
10. Once the inverter is enabled and in state, “grid con -
nected,” scroll right and enable each PV Link and
PWRcell Battery, repeating the process just per -
formed for the inverter. See
Figure 7-10
,
Figure 7-
11
, and
Figure 7-12
. Also see Section 6:
Commis -
sioning Enable REbus Devices
for more informa -
tion.
Figure 7-10. Enabling REbus Devices (1 of 3)
Figure 7-11. Enabling REbus Devices (2 of 3)
SA
System Mode Menu
GRd. Settings
SElibrate CTs
CLEPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Self Supply
Cancel Confirm
011139
Inverter
PWRcell 2P Inv.
2.4Wh
248V
0W
-02
Disabled
AC Power:
AC Voltage:
E-total:
010010
Enable
PWRcell 2P Inv. Menu
Mod. Settings
Calibrate CTs
RCPn: 000100073212
< EXIT SCROLL > NEXT • SELECT
010011
Enable
PWRcell 2P Inv Menu
Mod. Settings
Calibrate CTs
RCPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Enable
Cancel Confirm
010012
013444
Enable
PV Link S2502 Menu
Mod. Settings
Enable w/PVRSS
RCPn: 000100073212
< EXIT SCROLL > NEXT • SELECT
013443