manualshive.com logo in svg

Generac Mobile G4-ECO, Руководство пользователя

Поделиться
Скачать
Generac Mobile G4-ECO Скачать руководство пользователя страница 7

Introduction and Safety

Owner’s Manual for G4-ECO Light Tower

3

Battery Hazards

(000188)

DANGER

Electrocution. Do not wear jewelry while 
working on this equipment. Doing so will 
result in death or serious injury.

(000137a)

WARNING

Explosion. Batteries emit explosive gases while 
charging. Keep fire and spark away. Wear protective 
gear when working with batteries. Failure to do so 
could result in death or serious injury.

(000162)

Explosion. Do not dispose of batteries in a fire. 
Batteries are explosive. Electrolyte solution can cause 
burns and blindness. If electrolyte contacts skin or eyes, 
flush with water and seek immediate medical attention.

WARNING

(000163a)

Risk of burn. Do not open or mutilate batteries. 
Batteries contain electrolyte solution which can cause 
burns and blindness. If electrolyte contacts skin or 
eyes, flush with water and seek immediate medical 
attention. 

WARNING

WARNING

(000228)

Environmental Hazard. Always recycle batteries at an 
official recycling center in accordance with all local 
laws and regulations. Failure to do so could result in 
environmental damage, death, or serious injury.

Contact your local solid waste collection site or recycling

 

facility to obtain information on local recycling processes. 
For more information on battery recycling, visit the Battery 
Council International website at: 

http:// batterycouncil.org.

Fuel Hazards

(000192)

DANGER

Explosion and fire. Fuel and vapors are extremely
flammable and explosive. No leakage of fuel is
permitted. Keep fire and spark away. Failure to do
so will result in death or serious injury.

(000174)

DANGER

Risk of fire. Allow fuel spills to completely dry 
before starting engine. Failure to do so will 
result in death or serious injury.

WARNING

Explosion and Fire. Do not smoke while 
refueling unit. Failure to do so could result in 
death, serious injury, or property or equipment 
damage.

(000284a)

(000105)

Explosion and Fire. Fuel and vapors are extremely 
flammable and explosive. Add fuel in a well 
ventilated area. Keep fire and spark away. Failure 
to do so will result in death or serious injury. 

DANGER

Explosion and Fire. Fuel and vapors are 
extremely flammable and explosive. Keep fire 
and spark away. Failure to do so will result 
in death or serious injury.

(000168)

DANGER

•

DO NOT

 fill fuel tank while the engine is running. 

•

DO NOT

 operate with the fuel tank cap loose or 

missing.

Explosion and Fire Hazards

(000147)

WARNING

Risk of Fire. Unit must be positioned in a
manner that prevents combustible material
accumulation underneath. Failure to do so
could result in death or serious injury.

(000110)

WARNING

Risk of Fire. Hot surfaces could ignite 
combustibles, resulting in fire. Fire could 
result in death or serious injury.

Содержание G4-ECO













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды