Genelec Loudspeaker Manager (GLM) 4 - System Operating Manual
page 72 of 87
Figure 41. GLM Network Adapter connections from left to right, USB to computer or to USB power
supply, hardware level controller input, GLM measurement microphone input, GLM network and
terminator connectors.
9.5 Wireless Volume Controllers
Wireless volume controllers are available for adjusting the sound level. The wireless volume
controllers use radio frequency communication and do not need a line of sight to the GLM adapter.
The typical maximum operating range is 30 meters.
The wireless controllers work with the GLM adapter after pairing.
The pairing happens during the first 10 seconds after powering up the GLM Adapter. To pair with a
GLM Adapter, in the RF remote, first press and hold ‘+’ or ‘speaker icon +’ button and then press
and hold ‘–‘ or ‘speaker icon –‘ button. To check that the pairing has succeeded, observe the back
LEDs on the GLM Adapter. The LEDs will start blinking after successful pairing when you press a
button on the RF remote. If you do not observe this, repeat the pairing process.
The wireless controller can increase and decrease the audio output volume level and turn the
system on and off. The six-button remote the ‘<’ and ‘>’ buttons select the active group when the
GLM software is running in the computer. For more information on the wireless volume controller,
consult your Genelec sales representative.
Figure 42. Two wireless remote controllers to use with GLM
