USER MANUAL
GWR Router Series
62
Figure 41 – Connection Manager
Getting started with the Connection Wizard:
Connection Wizard is installed through few very simple steps and it is available immediately upon
the installation. After starting the wizard you can choose between two available options for configuration:
•
GWR Router’s Ethernet port
- With this option you can define LAN interface IP address and subnet
mask.
•
GWR router’s Ethernet port and GPRS/EDGE/HSPA/HSPA+/LTE network connection
- Selecting
this option you can configure parameters for LAN and WAN interface
Figure 42 – Connection Wizard – Initial Step
Select one of the options and click Next. On the next screen after Connection Wizard inspects the network
(whole broadcast domain) you’ll see a list of routers present in the network, with following information:
-
Serial number
-
Model
-
Ethernet IP
-
Firmware version
-
Pingable (if Ethernet IP address of the router is in the same IP subnet as PC interface then this field
will be marked, i.e. you can access router over web interface)
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299