Geneko GWR Cellular Router Series Скачать руководство пользователя страница 34

Страница: 34 / 88

USER MANUAL

GWR Router Series

Internet Protocol Security (IPSec)

Internet Protocol Security (IPSec) is a protocol suite for securing Internet Protocol communication

by authenticating and encrypting each IP packet of a data stream.

Click

VPN Settings

Tab, to open the VPN configuration screen. At the Figure 17 you can see IPSec

Summary screen. This screen gathers information about settings of all defined IPSec tunnels. You can define

up to 5 Device-to-Device tunnels.

Figure 17 - IPSec Summary screen

VPN Settings / IPSec Summary

Label

Description

Tunnels Used

This is the number of IPSec tunnels being defined.

Maximum number of

tunnels

This is the maximum number of tunnels which can be defined.

This filed indicates the number of the IPSec tunnel.

Name

Field shows the Tunnel Name that you gave to the IPSec tunnel.

Enabled

This field shows if tunnel is enabled or disabled. After clicking on

Start

button,

only enabled tunnels will be started.

Status

Field indicates status of the IPSec tunnel. Click on

Refresh

button to see current

status of defined IPSec tunnels.

Enc/Auth/Grp

This field shows both Phase 1 and Phase 2 details, Encryption method

(DES/3DES/AES), Authentication method (MD5/SHA1), and DH Group number

(1/2/5) that you have defined in the IPSec Setup section.

Advanced

Field shows the chosen options from IPSec Advanced section by displaying the

first letters of enabled options.

Local Group

Field shows the IP address and subnet mask of the Local Group.

Remote Group

Field displays the IP address and subnet mask of the Remote Group.

Remote Gateway

Field shows the IP address of the Remote Device.

Delete

Click on this link to delete the tunnel and all settings for that particular tunnel.

Edit

This link opens screen where you can change the tunnel’s settings.

Add New Tunnel

Click on this button to add a new Device-to-Device IPSec tunnel. After you have

added the tunnel, you will see it listed in the Summary table.

Start

This button starts the IPSec negotiations between all defined and enabled tunnels.

If the IPSec is already started, Start button is replaced with Restart button.

www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Содержание GWR Cellular Router Series

























































































Результаты поиска

Содержание GWR Cellular Router Series

Отзывы:

Похожие инструкции для GWR Cellular Router Series

Бренды по названию

Популярные бренды

Geneko GWR Cellular Router Series, Руководство пользователя

Результаты поиска

Содержание GWR Cellular Router Series

Отзывы:

Похожие инструкции для GWR Cellular Router Series

Бренды по названию

Популярные бренды