USER MANUAL
GWR Router Series
14
4.
Signal strength LED indicator:
•
–
107 or less dBm = Unacceptable (1 LED)
•
–107 to –
98 dBm = Weak (2 LED)
•
–98 to –
87 dBm = Moderate (3 LED)
•
–87 to –
76 dBm = Good (4 LED)
•
–76
or better dBm = Excellent (5 LED)
.
•
0 is not known or not detectable (running LED)
Signal strength LED will blink when GPRS/EDGE/HSPA/HSPA+/LTE connection is not active.
When connection is active Signal strength LED is on. Reset condition will be indicated by blinks of
the first and last Signal strength LED. When signal quality is not known or not detectable there will
be running LED indication.
Putting Into Operation
Before putting the
GWR Router in operation it is necessary to connect all components needed for the
operation:
•
GSM antenna;
•
Ethernet cable and
•
SIM card must be inserted.
And finally, device should have powered up using power supply adaptor.
SIM card must not be changed, installed or taken out while device operates. This procedure is
performed when power supply is not connected.
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
