© 2003 by
Cell - Meddetox System Ltd
●
Health Education - Sales - Marketing Company
●
www.cell-meddetox.com
14
Operating instructions
17. To empty the water residue from the Foot Spa
15. End / Stopping the Session
A bottle of environmentally friendly
cleaning agent
is
initially provided.
Detach
the
array
from
the Foot Spa
and rinse thoroughly in
cold running water. Fill a container large enough to hold the
array
and add the cleanser. The cleanser liquid should reach the top of
the coils in the
array
. Leave the
array
for approx. 5 minutes until
all residue is removed. Moving the
array
up and down in the fluid
can help remove residue. Remove the
cleaned array
from the
cleaning fluid
and again wash under running water. Store the
array in a container of clean water, again covering
the array
to
prevent the coils from oxidizing.
The array cleanser can be used many times but when it
becomes discoloured or smelly, pour down the toilet bowl.
Further tips see label:
Metal Cleaner.
Carry the
foot spa
with the plastic cover to the toilet bowl/WC.
Slowly and carefully empty the contents down the bowl.
Discard the dirty plastic cover to the refuse.
Take care to clean your toilet bowl to prevent residue build up.
16. Cleaning and disinfecting the arrays
Upon completion of a treatment session,
an audio signal will sound and the
program will automatically switch off.
By pressing the On / Off button the
device is switched off.
