Gendex GXS-700, Руководство пользователя

Страница: 50 / 310

Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
The GXS-700 sensor, used with a compliant computer, is intended for use in the electromagnetic
environment specified below. The customer or the user of the GXS-700 sensor should assure that it is
used in such an environment.
Immunity test IEC 60601 test
level
Compliance level Electromagnetic environment - guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2
+ 6 kV contact
+ 8 kV air
Complies Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Electrical fast
transient/burst
IEC 61000-4-4
+ 2 kV for
power supply
lines
+ 1 kV for
input/output lines
Complies (*) Mains power quality should be that of a
typical commercial or hospital
environment.
Surge
IEC 61000-4-5
+ 1 kV
line(s) to line(s)
+ 2 kV
line(s) to earth
Complies (*) Mains power quality should be that of a
typical commercial or hospital
environment.
Voltage dips,
short interrup-
tions and volt-
age variations
on power sup-
ply input lines
IEC 61000-4-
11
<5% U
T
(95% dip
in U
T
) for 0,5 cycle
40% U
T
(60% dip
in U
T
) for 5 cycles
70% U
T
(30% dip
in U
T
) for 25 cy-
cles
<5% U
T
(95% dip
in U
T
) for 5 sec.
Complies (*) Mains power quality should be that of a
typical commercial or hospital
environment. If the user of the GXS-700
requires continued operation during
power mains interruptions, it is
recommended that the GXS-700 be
powered from an uninterruptible power
supply or a battery.
Power fre-
quency (50/60
Hz) magnetic
field
IEC 61000-4-8
3A/m Complies Power frequency magnetic fields should
be at levels characteristic of a typical
location in a typical commercial or
hospital environment.
NOTE 1 U
T
is the AC mains voltage prior to application of the test level.
(*) Computer used with the GXS-700 sensor must meet this rating.
Gendex GXS-700 TM
English B-2
GXS-700.book Page 2 Wednesday, January 27, 2016 9:58 AM