Closing an End of the Articulated Arm
032-0207-EN Rev 0
1-10
(Continued)
3. Separate and remove the plastic Trim Covers from the end of the section
of the Articulated Arm. Set the Trim covers aside.
Figure 1-12 Articulated Arm Trim Covers
Closing an End of the Articulated Arm
1. Place the two sections at the end of the Articulated Arm, one on each
side. Press the two sections together ensuring that the pins of the one
section are aligned correctly inside the posts of the other section.
2. Restore power to the equipment:
– FOR A SYSTEM WITH A LINE CORD (120 V ac only), plug in the
line cord.
– FOR A HARD-WIRED SYSTEM, reconnect the mains supply
(external power source) and use a meter to verify the mains supply is
connected properly.
3. Turn ON the power switch
Inner Trim Covers
Outer Trim Covers
Printed on: 20 Apr 2012, 11:34:10 am; Printed by: UWE.ZELLER
