GENANO L
TD
GENANO ®TECHNOLOGY G310 LOG_ UM_ENG V2.3
TT /JSan
GENANO 310 OPERATING INSTRUCTION Page 6
Genano Ltd.
Tel. +358 (9) 7743 870
Kimmeltie 3
Fax. +358 (9) 7743 8711
FIN-02110 ESPOO
email: [email protected]
www.genano.fi
G
E
D
INSTALLATION
1. It is recommended to fill the water container before switching the
device ON.
2. Open the bottom basin by unlocking (d) and using the attached
handle (e).
3. Fill the water container (g) with water and washing fluid mixture
(See instructions below) (max. about 1,5 liters)
DO NOT CONNECT VOLTAGES OTHER THAN THE FACTORY LABELED RE-
QUIREMENT
.
4. Make sure that the main switch is in the OFF position (see above).
Plug the main power cable into GENANO 310
before
you plug in
the main cable into a
grounded
power socket.
5. Push the main switch into ON - position.
LOCK THE BOTTOM BASIN WHEN OPERATED NEAR
CHILDREN OR PETS
WASHING LIQUID
Genonex is premixed so just pour into watering container and pour in container (g)
Take 1,5 liters of distilled water and 1 dcl of
Genano MFI-washing fluid
and mix in
the watering can provided
POSITIONING
When position your unit please try to observe the following:
Position the unit where the people are working or staying for maximum effect (preferably in the
center of the area).
Do not treat unit as furniture and place in a corner for aesthetics or behind solid abject for cover.
The closer the unit is to the people the better results they will feel!!
Take care of normal ventilation. Do not position G310 in rooms where is no ventilation.
Be sure to position away from air intake vents so clean air isn’t drawn immediately into the
air ducts.
