GENANO L
TD
GENANO ®TECHNOLOGY G310 LOG_ UM_ENG V2.3
TT /JSan
GENANO 310 OPERATING INSTRUCTION Page 14
Genano Ltd.
Tel. +358 (9) 7743 870
Kimmeltie 3
Fax. +358 (9) 7743 8711
FIN-02110 ESPOO
email: [email protected]
www.genano.fi
Troubleshooting guide
Warning! Repairs and maintenance work must be carried out by qualified personnel only.
SYMPTOM
CORRECTIVE ACTIONS
The power does not turn on.
•
Check connection to the mains.
•
Check that power is switched on.
•
Check the service door is not open.
The green WASH-light is on when device is not washing.
•
Wait until the drying period is over.
•
If after a few hours the unit does not restart then reset the system
•
If error continues after resetting contact an authorized repair service
Red SERVICE/ERROR-light is continuously on.
•
Wait several hours.
•
Execute Power-wash.
•
Reset default program settings (Switch the unit OFF and wait about 20 seconds then restart).
•
If error continues after resetting contact an authorized repair service.
Device is leaking water.
•
It is possible that device leaks water if transported horizontally. Wait 8 hours before first use.
•
Check that the flush water basin is in its place. Empty basin if necessary
•
If leaking continues contact an authorized repair service.
Operating lights are not functioning.
•
Check connection to the mains.
•
Check that power is switched on.
•
Reset program settings.
“Increase water” light is not working when the water tank is empty.
•
Contact an authorized repair service.
Airflow through the device is poor or it smells of metallic gases.
•
Turn device off and contact an authorized repair service.
