Gemu 1283, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 48

24 / 48
1283
Contents
1 Notes for your safety 24
1.1 Explanation of symbols and signs 24
1.2 General notes 25
1.3 Correct use 25
2 Manufacturer‘s information 26
2.1 Transport 26
2.2 Delivery and performance 26
2.3 Storage 26
3 Dimensions 27
4 Mechanical mounting 28
4.1 Panel mounting 29
5 Electrical connections 30
5.1 Supply voltage 32
5.1.1 Common supply voltage for 3-point
controller and motorized actuator 32
5.1.2 Separate supply voltage for 3-point
controller and motorized actuator 32
5.2 Actual value input 33
5.2.1 Actual value input - motorized
actuator potentiometer (In 1) 33
5.2.2 Optional actual value input for
external 4-wire transmitter (In 2) 33
5.2.3 Optional actual value input for
external 2-wire transmitter (In 2) 34
6 Operation 34
6.1 Operating and display elements 34
6.2 Menu levels 35
6.2.1 Working level 35
6.2.2 Configuration level 35
7 Menu structure 35
8 Changing parameters 36
8.1 Changing the set value or
parameter value 36
9 Commissioning 36
9.1 Use of the 3-point controller for
positioning a motorized actuator 36
9.1.1 Initial commissioning without factory
setting (when supplied without a
mounted motorized actuator) 36
9.1.2 Initial commissioning with factory
setting (when supplied with a
mounted motorized actuator) 37
9.2 Use as a 3-point controller for
process control 37
9.2.1 Initial commissioning without factory
setting (when supplied without a
mounted motorized actuator) 37
9.2.2 Initial commissioning with factory
setting (when supplied with a
mounted motorized actuator) 37
10 Con fi guration menu 38
10.1 Parameter table 39
10.2 Explanation of parameters 39
10.2.1 System deviation – P:01 39
10.2.2 External set value signal – P:02 39
10.2.3 Actual value input In 1 – P:03
(Option) 40
10.2.4 Actual value input In 2 – P:04
(Option) 40
10.2.5 Analogue signal output – P:05
(Option) 40
10.2.6 Display indication – P:06 40
10.2.7 Lower position of control range –
P:07 41
10.2.8 Upper position of control range –
P:08 41
10.2.9 Scaling of the set value input –
P:09 41
10.3 Reset to factory settings 42
11 Error messages 43
11.1 Overview of error messages 43
11.2 Acknowledgement and elimination
of error messages during normal
operation 43
11.3 Acknowledgement and elimination
of error messages during
initialisation 44
12 Technical data 45
13 Order data 45
1 Notes for your safety
Please read the following notes carefully and
observe them!
1.1 Explanation of symbols and
signs
DANGER
Imminent danger!
®
Non-observance will lead to death or
severe injury.
CAUTION (WITHOUT SYMBOL)
A possibly dangerous situation!
®
Non-observance can cause damage to
property.
Application hints and other
especially useful information about
the GEMÜ 1283.