Gemtek WRTM-106B Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 91

background image

Wireless Router User Guide

90

C3. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause
undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

CE Marking Warning

This is a Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.

«
...
89
90
91

Содержание WRTM-106B




























































































Отзывы:

Нет отзывов

Похожие инструкции для WRTM-106B

Бренд: OBERON Страницы: 5

DI-624S - AirPlus Xtreme G Wireless 108G USB Storage...

Бренд: D-Link Страницы: 22

Бренд: Anaren Страницы: 27

Бренд: Jade Страницы: 7

Бренд: ZyXEL Communications Страницы: 11

Бренд: Pakedge Страницы: 10

Бренд: H3C Страницы: 34

Бренд: Airlink101 Страницы: 15

Бренд: Cambium Networks Страницы: 51

Бренд: Honeywell Страницы: 4

OnCell 3150A-LTE-EU

Бренд: Honeywell Страницы: 8

Бренд: Honeywell Страницы: 3

Бренд: Honeywell Страницы: 2

Бренд: Honeywell Страницы: 2

Бренд: Honeywell Страницы: 8

FocusBT AP-010-BT

Бренд: Honeywell Страницы: 14

Бренд: Honeywell Страницы: 2

Бренд: Honeywell Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды