Gemitto CJ-5516TX1, Руководство пользователя

Страница: 3 / 27

Suspended hole
Clamp
Ⅰ . Main Features
· Indicate the indoor & outdoor temperature with two senors, 3
readings in total, and also the MAX / MIN temperature records.
·Temperature Range of Indoor reading: 0℃～ 50℃ (32 ℉～ 122 ℉ )
·Two Sensors Temperature Range: -40℃～ 60℃ (-40 ℉～ 140 ℉ )
·Alarm function for indoor / outdoor temperature monitor.
)
Ⅱ . Instruction of Button Operation
·Under normal mode, press this button once to turn on/ off
INDOOR/ SENSOR1/ SENSOR2 temperature alarm function.
·Under normal mode, hold this button for 3 seconds to enter into
INDOOR/ SENSOR1/ SENSOR2 alarm MAX/ MIN temperature setup mode.
·Under INDOOR/ SENSOR1/ SENSOR2 alarm temperature setup
mode, press this button once to decide the MAX temperature
and move to the MIN temperature setting, while pressing for
another time is to confirm the MIN temperature and exit the alarm
temperature setup mode.
· Under normal mode, press this button to switch the temperature
unit between Celsius (℃ ) and Fahrenheit( ℉ ).
· Under INDOOR/ SENSOR1/ SENSOR2 alarm temperature setup
mode, press this button once to increase the temperature value.
Continuously increase the value if hold the button above 2 seconds.
· Under INDOOR/ SENSOR1/ SENSOR2 alarm temperature setup
mode, press this button once to decrease the temperature value.
Continuously decrease the value if hold the button above 2 seconds.
· Under normal mode, press this button once to clear the MAX/ MIN
temperature memory value of indoor/ outdoor temperature.
Ⅲ .Operation Instruction of the Main Functions
1. Battery Installation
· Put 3 pieces of ‘AAA’ alkaline batteries into the base, the LCD
screen will show all the sections for about 2 seconds, and you will
hear a ‘BI’ sound once. The base then will enter into the RF (radio
frequency) reception mode for 3 minutes. The base will exit RF
mode when successfully receive the signal or does not receive the
signal in 3 minutes.
· Put 2 pieces of ‘AA’ alkaline batteries into the sensors, the
indicator light will on for once then off, to indicate they are working.
2. INDOOR/ SENSOR1/ SENSOR2 Alarm Temperature Setup Mode
· Under normal mode, press the button / /
for over 3 seconds to enter into INDOOR/ SENSOR1/ SENSOR2 MAX
temperature limit setup mode.
· Press the button or to increase or decrease the
temperature value. The default of the MAX temperature in
INDOOR section is 60℃ (140 ℉ ), setting range is from -9℃～ 60℃
(15.8 ℉ ～ 140 ℉ ). The default of the MAX temperature in
SENOR1/ SENSOR2 section is 60 ℃ (140 ℉ ), setting range is from