background image

RTW101 Thermostat

This product has the following features:

1) Heating control
2) Programmable function of 24-hour per day and 7-day per week
3) 2 sets of permanent programs (factory setting program and self-setting program)
4) Large LCD display
5) The temperature difference adjustable between off and on;
6) Allowable to calibrate the temperature display;
7) Adjustable selection of comfort temperature, economic temperature, and antifreeze temperature;
8) Suitable for the control and energy saving of wall mounted boilers, condensation boilers and individual
household mearsuring heating system;
9) It can realize the function of one receiver controlling many sub-devices and many rooms at the same
time;
10) Display adjustable between C and F.
11)Only need 2 size AA 1.5V batteries for the power supply;.
12)Three transmission modes for selection, i.e. wired, wireless or multi-channel transmission.
13)Fast and Simple installation.

Display screen symbols

  Fig.1

   Present ambient temperature

      Comfort temperature

      Economic temperature

      Antifreeze temperature

   Present time

  7 days display in a week, and the present day display is in the square frame

Summary of Contents for RTW101













Reviews: