background image

(2)

CAUTION

: This product satisfies FCC regulations when shielded cables and con

nectors are used to connect the unit to other equipment. To prevent electromag
netic interference with electric appliances such as radios and televisions, use 
shielded cables and connectors for connections.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is 
intended to alert the user to the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of sufficient magnitude to constitute a 
risk of electric shock to persons.

READ INSTRUCTIONS:

All the safety and operating instructions should be read 

before the product is operated.

RETAIN INSTRUCTIONS:

The safety and operating instructions should be retained 

for future reference.

HEED WARNINGS:

All warnings on the product and in the operating instructions 

should be adhered to.

FOLLOW INSTRUCTIONS:

All operating and use instructions should be followed.

CLEANING:

The product should be cleaned only with a polishing cloth or a soft dry 

cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids
since they may corrode the cabinet.

ATTACHMENTS: 

Do not use attachments not recommended by the product manu

facturer as they may cause hazards.

WATER AND MOISTURE:

Do not use this product near water, for example, near a 

bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a 
swimming pool; and the like.

ACCESSORIES:

Do not place this product on an unstable cart, stand, tripod, brack

et, or table. The product may fall, causing serious injury to a child or adult, and seri
ous damage to the product. Use only with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.

CART:

A product and cart combination should be moved with care. Quick stops, 

excessive force, and uneven surfaces may cause the product and cart combina
tion to overturn. See 

Figure A

.

VENTILATION: 

Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from overheating, and 
these openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other similar surface. This 
product should not be placed in a built-in installation such as a bookcase or rack 
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.

POWER SOURCES:

This product should be operated only from the type of power 

source indicated on the marking label. If you are not sure of the type of power sup
ply to your home, consult your product dealer or local power company. 

LOCATION:

The appliance should be installed in a stable location.

NON-USE PERIODS: 

The power cord of the appliance should be unplugged from the

outlet when left unused for a long period of time.

GROUNDING OR POLARIZATION:

If this product is equipped with a polarized alternating current line plug (a plug 
having one blade wider than the other), it will fit into the outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try 
reversing the plug. If the plug should still fail to fit, contact your electrician to 
replace your obsolete outlet. Do not defeat the safety purpose of the polarized 
plug.

If this product is equipped with a three-wire grounding type plug, a plug having a 
third (grounding) pin, it will only fit into a grounding type power outlet.  This is a 
safety feature. If you are unable to insert the plug into the outlet, contact your 
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding type plug.

POWER-CORD PROTECTION:

Power-supply cords should be routed so that they 

are not likely to be walked on or pinched by items placed upon or against them, 
paying particular attention to cords at plugs, convenience receptacles, and the 
point where they exit from the product.

OUTDOOR ANTENNA GROUNDING:

If an outside antenna or cable system is 

connected to the product, be sure the antenna or cable system is grounded so as

to provide some protection against voltage surges and built-up static charges. 
Article  810 of the National Electrical Code, ANSI/NFPA 70, provides information 
with regard to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding conductors, loca
tion of antenna-discharge unit, connection to grounding electrodes, and require
ments for the grounding electrode.  See 

Figure B

.

LIGHTNING:

For added protection for this product during a lightning storm, or when

it is left unattended and unused for long periods of time, unplug it from the wall out
let and disconnect the antenna or cable system. This will prevent damage to the 
product due to lightning and power-line surges. 

POWER LINES:

An outside antenna system should not be located in the vicinity of 

overhead power lines or other electric light or power circuits, or where it can fall 
into such power lines or circuits. When installing an outside antenna system, 
extreme care should be taken to keep from touching such power lines or circuits 
as contact with them might be fatal.

OVERLOADING:

Do not overload wall outlets, extension cords, or integral conven

ience receptacles as this can result in a risk of fire or electric shock. 

OBJECT AND LIQUID ENTRY:

Never push objects of any kind into this product 

through openings as they may touch dangerous voltage points or short-out parts 
that could result in a fire or electric shock.  Never spill liquid of any kind on the 
product.

SERVICING:

Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.

DAMAGE REQUIRING SERVICE: 

Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

When the power-supply cord or plug is damaged.

•  If liquid has been spilled, or objects have fallen into the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an 
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal oper
ation.

If the product has been dropped or damaged in any way.

When the product exhibits a distinct change in performance, this indicates a need
for service.

REPLACEMENT PARTS:

When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part.  Unauthorized substitutions may result in
fire, electric shock, or other hazards.

SAFETY CHECK:

Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in 
proper operating condition.

WALL OR CEILING MOUNTING: 

The product should not be mounted to a wall or ceil

ing.

HEAT: 

The product should be situated away from heat sources such as radiators, 

heat registers, stoves, or other products (including amplifiers) that produce heat.

MULTI LANGUAGE INSTRUCTIONS

ENGLISH........................................................................................................................................................................................................................PAGE 4
DEUTSCH......................................................................................................................................................................................................................PAGE 6
ESPAÑOL........................................................................................................................................................................................................................PAG.E 8
FRANCAIS......................................................................................................................................................................................................................PAGE10

PLEASE READ BEFORE USING APPLIANCE, IMPORTANT WARNING & SAFETY INSTRUCTIONS!

RISK OF ELECTRICAL SHOCK DO NOT OPEN!

CAUTION

Содержание PMX-04













Отзывы: