Gemini GD20SS Скачать руководство пользователя страница 13

Страница: 13 / 16

5. Compressor stop/start working function:

When the machine is operating,any operation can cause compressor stop

working.And machine will turn to protection funtion of compressor stop

working 3 minutes and then start up,the other function is normal.

6. Low&High temperature protection function:

When temperature and humdity sensor test Room temperature≤0℃ or ≥40℃

and the sensor’s NTC disconnection or short circuit, compressor and fan motor

haven’t output, buzzer warning all the time and there is no reflection when

pressing any button, and it just will be effective after switch ON anew.

7. Failures Of Humidity&Temperature Sensor:

When the connect wire of humidity and temperature sensor breaks off, the

symbol of continuous dehumidification ”Cont” will wink. It doesn’t work

when pressing humidity setting button, but other function is well.

The appliance comes into continuous dehumidifying mode.

8. Refrigerent leakage test function:

The compressor will test the temperature of temperature and humdity sensor

and NTC of evaporator’s copper tube in every 8 minutes; If compressor test the

temperature different value is ≤3℃ between temperature and humidity sensor

and evaporator’s NTC successive 2 times, then it indicates abnormal, digit tube

blink (lightening 1s and extinguishing 1s)

Operating introduction

P13

If the machine is under dehumidifying or refrigerating,fetching out water tank

or switching OFF and then switching ON, interval time should reach 3 minutes,

and then machine will start dehumidifying.

Содержание GD20SS

















Результаты поиска

Содержание GD20SS

Отзывы:

Бренды по названию

Популярные бренды

Gemini GD20SS, Руководство пользователя

Результаты поиска

Содержание GD20SS

Отзывы:

Бренды по названию

Популярные бренды