10.0 - REPLACING
When the remote control batteries are too weak (see par. 2.2), replace them as
follows:
Separate the remote shells taking care not to damage the internal circuit.
Insert the new batteries taking care not to invert polarity.
Close the remote shells.
!
!
!
!
Remove the discharged batteries.
BATTERIES
10.1 - REMOTE CONTROL
Use only CR1616 batteries.
Discard used batteries properly in special dedicated containers.
Inserting the batteries the wrong way and/or using different type batteries
can damage the remote control or cause the batteries to explode.
BATTERIES
WARNING
!
PAGE15
PAGE 16
10.2 - TRANSPONDER
Proceed as follows to replace the battery:
1.
Separate the plastic covers and remove the circuit with care.
3.
Reassemble the
covers, turn ON
the TAG and make
sure it works.
1
3
+
2.
Slide out the dead battery and
insert a new one. Pay attention
not to invert polarity.
2
Use only CR2032 type batteries.
Inserting the battery the wrong way and/or using different type batteries
can damage the remote control or cause the batteries to explode.
Discard used batteries properly in special dedicated containers.
ATTENTION
!
