Gema OptiGun GA03-E, Инструкция по эксплуатации и список запасных частей

Страница: 20 / 45

V 02/22
18
•
Initial start-up OptiGun GA03-E
Operation
WARNING
Touching the gun parts
During the coating process, the gun can discharge along the body
of the coater if touching it.
► Do not touch any parts of the gun!
Setting of total air
correct powder cloud too little total air
A total air volume of 4 Nm³/h and a 50% powder share are rec-
ommended as the base values.
The total air volume is depending on the powder hose length, the number
of hose curvatures, the hose diameter, the conveying air pressure and the
supplementary air. The operation mode of the injector and the effect of
the supplementary air are described in the corresponding injector operat-
ing instructions.
The adjusted value of the total air volume can be left as it is, as
long as the same diameter powder hose is used. If the hose di-
ameter changes, the total air volume must be reset!