Gema OptiFlex 2 F, Краткое руководство пользователя

Страница: 8 / 84

Rev. 00 09/16
8

Safety OptiFlex 2 F
–
The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
–
Furthermore, the country-specific safety regulations also must be
observed.
Product specific security regulations
–
This product is a constituent part of the equipment and is therefore
integrated in the system's safety concept.
–
If it is to be used in a manner outside the scope of the safety
concept, then corresponding measures must be taken.
–
The installation work to be done by the customer must be carried out
according to local regulations.
–
It must be ensured, that all components are earthed according to the
local regulations before start-up.
For further security information, see the more detailed Gema
safety regulations!
WARNING
These general safety regulations must be read and understood in
all cases prior to start-up!
General information
This product is built to the latest specification and conforms to the
recognized technical safety regulations and is designed for the normal
application of powder coating.
Any other use is considered non-compliant. The manufacturer shall not
be liable for damage resulting from such use; the user bears sole
responsibility for such actions. If this product is to be used for other
purposes or other substances outside of our guidelines then Gema
Switzerland GmbH should be consulted.
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of conformity of use.
The relevant accident prevention regulations, as well as other generally
recognized safety regulations, occupational health and structural
regulations are to be observed.
Furthermore, the country-specific safety regulations also must be
observed.
Additional safety and operation notices can be found on the
accompanying CD or on the homepage www.gemapowdercoating.com.