Gema GG21, Инструкция по эксплуатации и список запасных частей

Страница: 27 / 74

Rev. 03 05/20
OptiStar 4.0 (CG21) Product description

27
1
– Change programs (press the Λ
or V key on the gun. It is
switching between programs P01-P20. To be able to use
this function, it must first be activated.
– Switch to PowerClean mode (Press
P button)
or
2
– Modify the powder output (press the Λ
or V key on the gun.
The powder output will be increased or decreased
accordingly)
– direct temporary activation of the PowerBoost function
(press P key)
The remote control is blocked as long as the keyboard lock is
activated or while in system parameterization mode.
Pressing one of the keys calls up the desired values instead of
the actual values!
Keyboard lock
The gun control unit has a keyboard lock to prevent modification of
individual parameter values (kV, µA etc.) within the operating modes
(Program and Preset). Following is not affected by the keyboard lock:
–
Program selection
–
Display of the desired values of the current program
–
Display of the actual values
–
Error acknowledgment
An active keyboard lock is indicated by a blinking of the remote display.
To be able to use this function, it must first be activated. See chapter
"Activate/deactivate the keyboard lock" on page 50.
fig. 13
The keyboard lock status remains stored, when switching the equipment
off and on. The keyboard lock is cancelled if a RAM reset is performed.
Background illumination
Brightness
8 different brightness settings are available for the display. The setting
remains in place when the machine is switched on/off.