Gema FPS16 Скачать руководство пользователя страница 35

Страница: 35 / 62

Rev. 00 03/22

OptiFeed BigBag (FPS16)

Operation

•

The fluidizing/suction unit digs itself into the powder and the powder pump conveys powder to the powder hose

Operation

When operating the equipment, hazards can occur during powder
conveying and cleaning.

WARNING

Cleaning with compressed air!

Eye injury and bodily injury from compressed air and flying parts.

►  Wear eye protection.
►  DO NOT point the compressed air jet at persons.
►  DO NOT point the compressed air jet at loose objects.

CAUTION

Hearing damage caused by sound overexposure

Peak noise levels (for a short time up to 95 db(A)) occurring during
the cleaning process may cause hearing damage.

► Wear adequate hearing protection (e.g. ear muffs per EN 352-1)!

CAUTION

Large dust formation possible!

If no dust mask or one of an insufficient filter class is worn when
cleaning the product, then the dust that is stirred up from the
coating powder can cause respiratory problems.

► The ventilation system must be turned on for all cleaning work.
► A dust mask corresponding to filter class FFP2 or N95 at

minimum must be worn during any cleaning work.

A great deal of air is required for the cleaning procedure!

► Make sure that 6 bar is always available!

Содержание FPS16































































Результаты поиска

Содержание FPS16

Отзывы:

Похожие инструкции для FPS16

Бренды по названию

Популярные бренды

Gema FPS16, Руководство по эксплуатации

Результаты поиска

Содержание FPS16

Отзывы:

Похожие инструкции для FPS16

Бренды по названию

Популярные бренды