Gema FPS16, Руководство по эксплуатации

Страница: 22 / 62

Rev. 00 03/22
22
•
Product description OptiFeed BigBag (FPS16)
Vibrating plate
When using the vibrating plate, the constant powder transport is
guaranteed. The vibrating plate is hung on the hang-up plate by means of
two spring hooks and is then laid loosely onto the Big Bag. The vibrating
operation is started automatically every time the suction is switched on.
However, the vibration can be manually switched on and off using an
additional switch, and a light indicates the condition.
Control
All operation and control elements for the FPS16 Fresh powder system
are implemented in the laterally attached control unit.
Control cabinet
The control cabinet contains the following operating elements:
Fig. 5: Control cabinet
– view
Pos. Function Description
1
Main switch The complete control unit is disconnected from the mains with the
main switch
2
Vibrator ON/ OFF This switch turns the vibration plate on/off
3
Big Bag empty This red indicator lamp illuminates, if the powder flow sensor does
not detect powder during a defined time. Now the large powder
container must be checked by the operating personnel and
probably be changed
4
Conveying ready The readiness for powder conveying is created by the Automatic
switch position
– The readiness is indicated by the indicator lamp (
pos. 5 )
– Therewith, the lifting up of the large container will be started.
Depending on the weight in the large container, the lifting up
takes place after the powder discharge, if the weight of the
container is smaller than the adjusted lifting power of the
pneumatic cylinders
– As soon as the level sensor of the powder container detects
“empty”, the powder transport and the vibrating plate switch
on automatically