GEM iComLine CleanStar C57 HPW, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 44

C57 HPW
4. Fully tighten the Allen bolts 18 diagonally
(see below for torques).
18
a
b
c
d
Bonnet
size
Wrench
size
Thread
diameter
Tightening
torque [ Nm ]
1 3 M4 0.70
2 4 M5 1.10
3 5 M6 2.00
4 8 M10 4.15
5. Push in new caps 39 until they are fl ush
with bonnet A .
39
A
Important:
When mounting a replacement
bonnet A please assemble the
loosely supplied optical position
indicator S according to chapter
11.5 "Replacing the optical position
indicator" from point 3!
11.5 Replacing the
optical position indicator
Bonnet size 1 - 3:
1. Move bonnet A to the closed position.
Then turn back the handwheel H until
resitance is felt (see chapter 10.2), and
keep it in this position.
2. Prick cap K with a screw driver, carefully
pry it upwards with the optical position
indicator S and dispose.
K
A
S
H
34 / 44