GEM CleanStar C60 HPS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 48

C60
14 Disassembly
Disassembly is performed observing
the same precautionary measures as for
installation.
G
Disassemble the diaphragm valve
(see chapter 11.1 "Installing the
diaphragm valve").
CAUTION
Do not disassemble valve body and
actuator!
®
Danger of leakage or defect!
®
Manufacturer's warranty will be voided.
15 Disposal
G
Fully rinse the diaphragm
valve before disposal.
G
All valve parts must be
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
G
Pay attention to adhered
residual material and gas
di ff usion from penetrated
media.
16 Returns
G
Clean the diaphragm valve.
G
Request a goods return declaration form
from GEMÜ.
G
Returns must be made with a completed
declaration of return.
If not completed, GEMÜ cannot process
credits or
repair work
but will dispose of the goods at the
operator's expense.
Enter data from the product label on the
declaration of return:
C60 8T7530A12 1675/HPW
PB 6 bar
ID-CH-88089374-047527
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
17 Information
Note on staff training:
Please contact us at the address
on the last page for sta ff training
information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!
Type
Serial
number
42 / 48