User’s & Technical Manual –
ANALOG LIQUID LEVEL SENSOR ALLS6000
GELEC
Industrial Electronics
PAGE
23
ELECTRICAL CONNECTIONS
The unit is equipped with two 5mm pitch connectors located at the top
and bottom. Let some free space (about 15mm) at both top and bottom
sides for the wires to be inserted and connected properly. Insert and screw
only one wire in each terminal in order to be in compliance with VDE
norms.
The cable may be rigid solid from 0.2mm
2
up to 4.0mm
2
or flexible
stranded from 0.2mm
2
up to 2.5mm
2
(24-12AWG) (stranded with ferrule or
plastic sleeve up to 0.75mm
2
) stripped over 10mm length.
Always follow the instructions given by the manufacturer and use
the ALLS6000 according to its specifications.
14.
ELECTRICAL CIRCUIT DIAGRAM
fig. 23
fig. 24
