GEKKO GTO 22, Руководство пользователя

Страница: 34 / 148

The three (3) most important aspects of new engine break-in are:
• Avoid running engine at high speeds.
• Do not carry a heavy load (passengers, gear, etc.)
• Vary your boat speed during Break-in. Do not run at the same RPM for a long period
of time.
B
reak In Steps
TOP
• For the first hour, do not exceed 2,000 RPM.
• For the second hour, do not exceed 3,000 RPM.
• For the next five hours, do not exceed 4,000 RPM.
B
reak In Tips
• Avoid fast accelerations and carrying or pulling a heavy load during this period.
• Always let engine warm up gradually before acceleration.
• Check oil frequently. During the first 50 to 100 hours, an engine can use more oil
than usual. Maintain oil at a proper level at all times (do not overfill).
• Monitor transmission fluid levels.
• Report abnormal noises or vibrations to your dealer.
• Keep an eye out for loose mountings, fittings, nuts, bolts, and clamps.
During the BREAK-IN process, engine temperature should be carefully monitored and
speed should be reduced if overheating is evident. Also, please refer to engine owner’s
manual for break-in information.
IMPORTANT
PLEASE REFER TO ENGINE OWNER’S MANUAL for maximum RPM and engine
break-in procedure. After the first 20 hours of operation, take your boat to the dealer
for its first oil and filter change, as well as an engine checkup. Remember to keep a
sharp eye on all gauges and warning lights during these first hours of operation.
Report anything unusual to you dealer.
After the break-in procedure is over, your boat may be operated continuously at any
speed.
CAUTION !
Do not exceed maximum RPM recommended for your engine. Exceeding the
maximum RPM may result in damage to the engine.
Section 8- GT Series Instrument Panel & Controls TOP