GEKKO GTO 22, Руководство пользователя

Страница: 33 / 148

• When ready to get underway, shift slowly into forward or reverse, allowing the
transmission time to engage the gearing before powering up.
If Carburetor Engine Still Does Not Start TOP
• Place shift selector in Neutral with the throttle in the upright (zero) position and
push the transmission lockout button at the bottom of the lever to disengage the
transmission.
• With the transmission disengaged, move the throttle lever back and forth from
one/fourth to one/third throttle.
• While moving the throttle lever turn the ignition key to Start Position to operate
the starter.
• When the engine starts. Operate the throttle lever to establish an engine idle of
1200 to 1500 RPM.
IMPORTANT
Do not operate the starter for more than 15 seconds at a time. Allow the starter to rest
for a full minute before attempting this starting procedure again.
If Carbureted Engine Floods TOP
• Place shift selector in Neutral with the throttle in the upright (zero) position and
push the transmission lockout button at the bottom of the lever to disengage the
transmission.
• Push the throttle lever to the full throttle (wide open) position.
• Turn Ignition Key to operate starter.
• When the engine starts, back off the throttle, but allow the engine to idle at 1500
RPM until it smoothens out.
IMPORTANT
Do not operate the starter for more than 15 seconds at a time. Allow the starter to rest
for a full minute before attempting this starting procedure again.
Break In Period TOP
Taking care to properly break in your new engine will pay off in the long run, in our
years of field testing, we have proven that our engines, when properly broken in
according to our simple procedures, will last longer, run better and have fewer repairs
over its lifetime.
Your new engine does not require an elaborate break-in procedure. Just follow these
simple instructions and you are off to a great start.