R-Series v5 Instruction Manual
66
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
sessions are supported; the "StartTLS" method, where the session starts out as
unencrypted and then switches to encrypted partway through the session, is not
supported. If using a service that utilizes StartTLS, such as Office365, please leave this
option Disabled.
·
"From" Email Address:
The address which the unit's emails should appear to come
from. Many hosted email services, such as Gmail, will require this to be the email
account of a valid user.
·
Username
and
Password:
The login credentials for the email server. If your server
does not require authentication (open relay), these can be left blank.
Microsoft Exchange servers will have to be set to allow SMTP relay from the IP address of
the unit. In addition, the Exchange server will need to be set to allow "Basic
Authentication", so that the unit will be able to log in with the AUTH LOGIN method of
sending its login credentials. Other methods, such as AUTH PLAIN, AUTH MD5, etc. are
not supported.
Figure 3-39 Email Target Configuration Page
To Add or Modify a Target Email address:
1. Click on the Add or Modify icon.
2. Type email address and then click
Save
.
To Delete a Target Email address:
1. Click on the Delete icon next to the address you wish to delete.
2. Click the
Delete
button on the pop-up window to confirm.
To send a test email:
1. Click on the Test Email icon next to the address you wish to test.
2. A pop-up window will indicate that the test email is being sent. Click
OK
to dismiss
the pop-up.
SNMP
Simple Network Management Protocol (SNMP) can be used to monitor the unit's
measurements and status, if desired. SNMP v1, v2c and v3 are supported. In addition,
Содержание RCM-O
Страница 1: ...R Series v5 Instruction Manual geistglobal com...
Страница 82: ...Thank You For Purchasing Geist geistglobal com...
