Geist RCM-O, Инструкция по эксплуатации

Страница: 42 / 82

R-Series v5 Instruction Manual 42
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
Alarms & Warnings
The Alarms & Warnings page allows users to establish alarm or warning conditions
(hereafter referred to as "Events") for each power, circuit and outlet readings. Events are
triggered when a measurement exceeds a user-defined threshold, either going above the
threshold ("high-trip") or below it ("low-trip"). Events are displayed in different sections,
based on the device or measurement the Event is associated with. Each Event can have
one or more Actions to be taken when the Event occurs.
Figure 3-8 Alarms & Warnings Page
1. State : Shows the status of each Event.
· Empty: No alert condition.
· : This symbol indicates that this particular "Warning" Event has been tripped. A
tripped Warning Event displays in orange.
·
: This symbol indicates that this particular "Alarm" Event has been tripped. A
tripped Alarm Event displays in red.
· : This symbol will indicate that this Event has not yet been acknowledged by a
user after being tripped. It will remain this way until the condition being measured by
this Event returns to normal (i.e. ceases to exceed the trigger threshold for this
Event.) or the user has clicked the button to acknowledge the Event.
2. Configuration : Add/Delete/Modify Alarms & Warnings.
· : Add new Alarms & Warnings.
· : Modify existing Alarms & Warnings.
·
: Delete existing Alarms & Warnings.
3. Notification : Notify user of tripped Events, and request acknowledgment.
· Empty: If the is not present, it means that no alert condition is present or the
Event has been acknowledged.
·
: Acknowledge button. When a Warning or Alarm Event has occurred; the user
can click on this symbol to acknowledge the Event and stop the unit from sending
any more notifications about it.