GEIGER GF0043 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 32

GEIGER GF0043 Скачать руководство пользователя страница 5

5 of 32

5. Operating conditions

In order to maximize battery lifetime, three different energy
modes are available.
The power-saving mode is also equipped with a key lock, for
avoidance of unintentional switching, such as the closing of
a shutter.

5.1 Operational mode

Press OK key to turn on the transmitter (wake up process from
the power saving mode). The first location shows on the display.
All keys are active and the display is illuminated.

5.2 Energy saving mode with snooze

function

If no action takes place within 10 seconds, the snooze
function is activated. The display light shuts off but all keys
keep active. When actuating a key again the display light
turns on.

5.3 Deep sleep mode

You get the transmitter to enter the deep sleep mode when
all keys are not actuated for 1 minute. The display shuts down.
Only the OK key keeps active. To wake the transmitter back up,
simply press the OK key. The programmed switching times of
the timer are running in the background.

Note:

the 10 shortcut keys are only available

on the 50-channel handheld transmitter
GF0050.

Important:

the

energy saving mode is off when the

the USB-PC mode is activated (see page 17)

Exit USB-PC mode with key

Switch
on with
OK key

«
...
3
4
5
6
7
...
»

Содержание GF0043

































Отзывы:

Нет отзывов