GEIGER GF0043, Руководство пользователя, Страница: 12 / 32

12 of 32
Quit the first coding switch in order to select the receiver type.
Keep the vertical navigation key depressed.
. . .
... until the check box next to the coding switch flashes.
Activate navigation key “DOWN” to get to the box next to the
second coding switch. (left box flashes!)
Press the OK key to access the display „receiver selection“.
Select the appropriate icon pair (see also point 7.3.)
with the navigation keys (UP/DOWN). Press OK key
to save your selection.
The display returns to code entry . The switch positions
1 - 7 have been applied, the switch positions 8 + 9 are automatically set to the next following
channel.
If the selected receiver is not controlled by a sensor, then go directly to
point 7.4
To set a sensor coding you can use any of the switch positions
1- 6. The coding of switches 7 - 9 is automatically generated
by the sensor.
Press 3 times the navigation key “DOWN”
to get to the last coding switch. Activate the navigation keys in order to set the desired coding
for the sensor.
All settings are saved with the multifunction key .You return to the receiver menu
name / code entry / delete.
The receiver selection reopens with the multifunction key and you can select another
icon pair, if necessary.
You jump back one level with the multifunction key and enter the receiver menu
„name / code entry / delete“.
Important: the settings are not accepted here!