GEIGER GF0043, Руководство пользователя, Страница: 3 / 32

3 of 32
1. Introduction
The purchase of the handheld transmitter with graphic display GF0043/GF0050 was a good
decision. You have acquired a high-quality product from the house of GEIGER.
The handheld transmitter enables to send either 8 or 50 different codings to control a range of different
receivers:
•
Individual
•
Grouped or
•
Centralized controls
No labour-intensive and time-consuming laying of control lines is needed as all switching signals are
transmitted via radio.
An integrated timer with astro function enables the automatic sending of switching commands at pre-
selected times. Following radio receivers with integrated control can be controlled with the GEIGER
handheld transmitters GF0043/GF0050:
•
all GEIGER radio motors
•
all external radio receivers
2. Safety instructions
The operation of the actuators and the electrical products shall only take place when you are sure that there
is no risk to people, animals or property.
The radio remote control should be kept out of reach of children.
If service work or adaptations are necessary, the device is to be immediately taken out of
service and secured against inadvertent use.
3. Intended use
The comfort handheld transmitter is only to be used for its intended purpose as described under
Section 1 of the operating instructions.
Changes or modifications to the transmitter void any rights to claims under the guarantee. After
unpacking the device, check it right away for any damage. Transport damage is to be reported to the
supplier immediately.
4. Transmitter description
Comfort-handheld transmitter with graphic display GF0043
•
3 areas for the selection of 6 different codings each.
•
With USB interface and software-CD for individual labelling of the receivers and timer
programming via a MS-Windows PC.
•
Alternative labelling of the receivers with terms of an internal library.