Gehl RS5-19, Руководство оператора

Страница: 48 / 82

50960066/AP0813
46
PRINTED IN U.S.A.
GENERAL INFORMATION
This Service and Storage chapter describes procedures
to follow for making routine maintenance checks,
adjustments and replacements. Most of the procedures
are also referred to in the Maintenance chapter of this
manual. For engine-related adjustments and servicing
procedures, refer to the engine manual provided.
All service routines, with the exception of those
described under the “Dealer Services” topic, are
owner-operator responsibilities. All operator services
described under the subtopics are also referred to on a
decal located on the inside right side panel of the oper-
ator’s station. Refer to the Lubrication chapter of this
manual for lubrication information.
PRECAUTIONS
DO NOT perform any maintenance or repair without
the owner’s prior authorization. Allow only trained
personnel to service the machine.
Warranty repairs can only be done by an authorized
Gehl dealer. Dealers know what portions of the
machine are covered under the terms of the Gehl
Warranty and what portions are covered by other ven-
dor warranties.
When a problem occurs, do not overlook simple caus-
es, such as an empty fuel tank. Check for leaks and
broken connections. Make note of any specific symp-
toms, noises, etc. and contact your local Gehl dealer.
IMPORTANT: Always dispose of waste lubricating
oils, anti-freeze and hydraulic fluids according to
local regulations or take them to a recycling cen-
ter for disposal. DO NOT pour them onto the
ground or into a drain.
DEALER SERVICES
The following areas of internal components service
replacement and operating adjustments should only be
by (or under the direction of) an authorized Gehl
Telescopic Handler dealer.
IMPORTANT: DO NOT service or repair major
components, unless authorized to do so by your
Gehl dealer. Any unauthorized repair will void the
warranty.
POWERTRAIN COMPONENTS
The engine and hydrostatic transmission are coupled
directly to each other. All service routines related to the
internal components are precise and critical to proper
powertrain operation. The axle differential and plane-
tary ends are sophisticated assemblies that require spe-
cial know-how and tools for servicing.
IMPORTANT: If any powertrain components are
suspected of faulty operation, contact your Gehl
dealer for assistance.
HYDRAULIC SYSTEM COMPONENTS
Valves, pumps, motors and cylinders are sophisticated
assemblies, which require special know-how and tools
for servicing. All cylinders are appropriately designed
with particular strokes, diameters, checks and hose
connection provisions unique to the machine applica-
tion requirements. A schematic (Maintenance chapter)
can be used as a guide for service reference, as
required.
Internal service on any of these components should
only be performed by (or under the direction of) an
authorized Gehl Telescopic Handler dealer.
Chapter 8
SERVICE AND STORAGE
WARNING
BEFORE performing any service on the
Telescopic Handler, unless expressly instruct-
ed to the contrary, exercise the Mandatory
Safety Shutdown Procedure (p. 8, Safety chap-
ter). After service has been performed, BE
SURE to restore all guards, shields and cov-
ers to their original positions before resuming
machine operation.