Gehl 383Z, Руководство оператора

Страница: 80 / 112

918196/EP0913 4-6 Printed in U.S.A.
Check, Clean & Inspect (continued)
Fluid and Filter Changes
Service Activity Daily Every 50
Hours
Every 250
Hours
Every 500
Hours
Every
1000
Hours
Customer Dealer
Check tracks for cracks or cuts x x
Check track tension; adjust if
necessary x x
Inspect cylinder piston rods for damage x x
Ensure bucket and attachment pins are
secure and locked x x
Pin lock (dipper arm and attachment) x x
Inspect hydraulic line clamps for tight-
ness/damage x x
Clean hydraulic couplings/dirt build-up
on the hydraulic system dust caps x x
Grease central lubrication system x x
Inspect engine cover gas strut x x
Check primary pressure relief valve
pressure
a
x x x
Check fasteners for tightness
a
x x x
Check indicator lights for correct func-
tion
a
x x x
Cab/canopy tilt lock/support compo-
nents
a
x x x
Insulating mats in the engine compart-
ment x x
Warning decals and Operator’s Manual
in place/undamaged x x
Check air filter restriction indicator x x
Check bearing play on tread rollers,
track carrier rollers and front idlers x x
a. Check after first 50 hrs; every 500 hrs thereafter.
Service Activity Daily Every 50
Hours
Every
250
Hours
Every
500
Hours
Every
1000
Hours
Cus-
tomer
Dealer
Engine oil
x
a
x
b
x x
Engine oil filter
x
a x x
Fuel filter
x
c
x x
Hydraulic oil filter
x
c
x x
Gearbox oil
x
d
x x
Hydraulic oil x x
Breather-hydraulic oil tank x x
Air filter element when indicator light comes on x x
Engine coolant x x
a. Change after first 50 hrs; every 500 hrs thereafter.
b. Dusty work environment, high temperature, high rate of hammer use, and similar intensive use conditions.
c. Change after first 50 hrs; every 500 hrs thereafter.
d. Change after first 50 hrs; every 1000 hrs thereafter.