918196/EP0913
3-22
Printed in U.S.A.
When working on soft or muddy ground, be sure that
the machine is not sinking.
DO NOT
use the bucket as a hammer or ramming
device.
Figure 3-29 Machine Position for Excavating
Operating on Slopes
Operating on a slope is hazardous. It is recommended
the work area be leveled as shown in Figure 3-30. If
this is not possible, use the following guidelines:
Figure 3-30 Level Work Area on Slope
•
Travel straight up and down slopes — never across.
See Figure 3-27. Extend arm and lower boom to
keep the bucket about 12” (300 mm) off the ground.
If the machine starts to slide or becomes unstable,
lower the bucket to regain control. If the engine
stalls, lower the bucket, be sure that all controls are
in the neutral position and restart the engine.
•
When traveling down a slope, control the speed with
the travel levers and the throttle control.
•
When traveling down grades that exceed 15°, put the
machine in the position shown in Figure 3-31.
Reduce engine speed.
IMPORTANT
When digging at maximum excavation
depth, BE SURE that the dozer blade does
not contact the boom cylinder. Damage to
the boom cylinder may occur if it contacts
the dozer blade.
WARNING
•
Do not travel up or across a slope
steeper than 15°. Do not travel down a
slope steeper than 25°. Keep the boom
centered while traveling.
•
Keep attachments as low as possible
when traveling on slopes or rough ter-
rain.
Содержание 383Z
